How to Measure for a Face Fit Blind
By Betta Blinds and Awnings - 5th December 2022
Inspect the Location
1. Inspect the window and mounting points for anything that could prevent the Blind from being installed or operated.
2. Begin measuring the width by placing the end of your tape measure on the architrave and measure to the opposite architrave. Our example measurement is 2504mm.
2. Begin measuring the width by placing the end of your tape measure on the architrave and measure to the opposite architrave. Our example measurement is 2504mm.
Repeat Steps 2 and 3
To accurately measure the window up, you need to take a total of three measurements for both the width and the height.
4. Repeat Steps 2 and 3 for halfway down the window and the bottom of the window.
4. Repeat Steps 2 and 3 for halfway down the window and the bottom of the window.
Note
If your 3 measurements vary use the smallest one to order your blind.
If your 3 measurements vary use the smallest one to order your blind.
Measure the Height
You also need three measurements for the height.
5. Starting from the left hand side place your tape measure on the top of the architrave.
6. Measure to the bottom of the architrave. Our example measures 1890mm.
5. Starting from the left hand side place your tape measure on the top of the architrave.
6. Measure to the bottom of the architrave. Our example measures 1890mm.
Repeat Steps 5 and 6
7. Repeat steps 5 and 6 for the middle and right hand side of the window.
Order Your Blind
8. Use these measurements to order your Roller Blinds
