How to Add a Fabric Insert to Flat Bottom Rail

By Betta Blinds and Awnings - 5th May 2022

Remove One End Cap

1. Use a flathead screwdriver to gently pry the clear plastic end cap from the bottom rail. Be careful not to scratch the bottom rail.
remove bottom rail plastic clips

Remove and Flip the Bottom Rail

2. Remove the bottom rail and flip it so that the side with the channels that house the insert is facing up.
remove roller blind bottom rail
replace roller blind bottom rail

Insert the Fabric Piece

3. From the side with the end cap removed gently insert the fabric and run your finger over it to ensure that the fabric is correctly fitted inside the channels.
add fabric insert to roller blind

Replace the End Cap

4. Replace the clear plastic end cap to complete the bottom rail.
replace end cap

And You're Done!

Congratulations you have successfully changed your flat bottom rail to flat bottom rail with an insert!

Contact Us

Shop 6, Mammoth Business Centre
380 Mons Road , Forest Glen

Sunshine Coast
Queensland  4556, Australia

 

Manufacturing

Betta Blinds and Awnings is a manufacturer and wholesaler. 

We can connect you with retailers who will be delighted to help: Find a Retailer 

bmaa logo

Privacy Policy

Information

All images are copyright to their respective owners and are protected under international copyright laws. Without prior permission it is not permitted to copy, download, or reproduce these images. 

Australian Made

 

© 2024 Betta Blinds and Awnings