Put Panel or Roman Blind Batten End Cap Back on
By Betta Blinds and Awnings - 5th December 2022
Note
This applies to Panel Glides and Roman Blinds
This applies to Panel Glides and Roman Blinds
How Does a Batten End Cap Fall Off?
The batten end caps on Roman Blinds and Panel Glides can occasionally fall off in some situations. As the blinds age the glue that adheres the batten end caps can begin to deteriorate from wear and tear. Luckily this is a simple fix that can be solved with the use of super glue.
1. Clean the end cap and the batten to ensure there is no dust or debris that could prevent the cap from adhering correctly.
2. Apply superglue to the cap and then push the cap back onto the batten.
3. Ensure the cap is pressed firmly into position than allow the glue to dry completely before operating the Blind.
1. Clean the end cap and the batten to ensure there is no dust or debris that could prevent the cap from adhering correctly.
2. Apply superglue to the cap and then push the cap back onto the batten.
3. Ensure the cap is pressed firmly into position than allow the glue to dry completely before operating the Blind.
